松香改性酚醛环氧树脂的合成与表征

以松香,环氧氯丙烷,甲醛及苯酚等为主要原料,合成了一种新型的环氧树脂。通过正交实验法确定了环氧化反应的最佳实验条件,即环氧化温度90℃,碱用量13 g,催化剂为cat 1,其最佳用量为0.018 mol,环氧氯丙烷的用量为50 g,碱浓度为30%(以上数值均以松香用量为70 g时计)。在最佳实验条件下合成得到了松香改性酚醛环氧树脂(简称RAPE),并用HPLC、FT-IR、NMR对其进行结构表征。结果表明,得到的RAPE其环氧值为0.28 mol/100g,平均聚合度约为3.4,酚羟基和树脂酸上的羧基基本反应完全,得到一种新型的缩水甘油醚型和缩水甘油酯型的环氧树脂。     

环氧丙烯酸酯的紫外光固化

制备了适于配制紫外光固化涂料的环氧丙烯酸酯，研究了反应温度、阻聚剂、催化剂等因素对环氧树脂与丙烯酸反应的影响；讨论了反应机理和动力学；并利用红外光谱观察了产物的紫外光固化行为。季铵盐能有效地催化环氧树脂和丙烯酸的反应，当其用量为０．６％～１．２％时，在９０～１１０℃反应４．５～８小时后，环氧基转化率大于９７％。由此配制的光固化涂料经紫外光辐照能快速固化。     

光固化环氧丙烯酸酯/SiO2杂化材料的研究

用FTIR、SEM、DSC和TGA表征了光固化环氧丙烯酸酯／SiO2杂化材料[(EA-TMSPM)／SiO2]，研究了盐酸、γ-甲基丙烯酰氧丙基三甲氧基硅烷(TMSPM)和无机物浓度对(EA-TMSPM)／SiO2结构与性能的影响。结果表明，无机物浓度高的(EA-TMSPM)／SiO2杂化体系中SiO2粒子尺寸略大于无机物浓度低的体系；盐酸和无机物浓度的增加，都可以增强杂化材料的耐磨性。     

磷系阻燃环氧树脂研究

本文对近年来国内外9,10-二氢-9-氧杂-10-磷杂菲-10-氧化物（DOPO）衍生物的合成及其应用于阻燃环氧树脂的方法进行介绍，并对所显示的阻燃性、热性能等作了概述和比较。将反应型磷系阻燃剂DOPO衍生物引入环氧树脂基体结构中形成阻燃持久、无卤、低烟、无毒、热稳定性好的新型含磷环氧树脂。     

Liquid chromatography of benzene derivatives on a porous methacrylate copolymer containing epoxy groups

Summary The retention of benzene derivatives with nonpolar and polar substituents on a porous methacrylate copolymer containing epoxy groups using both nonpolar and polar eluents was investigated. When n-hexane is used as the eluent, the retention of n-alkylbenzenes and polymethylbenzenes is weaker than that of benzene. In the case of benzene derivatives containing polar functional groups their capacity ratios (k) on this porous polymer increases approximately linearly with the increase of the adsorbate molecules dipole moment. The retention characteristics of the methacrylate copolymer were compared with that of a styrene-divinylbenzene copolymer and silica gels with a hydroxylated surface and with a surface modified by chemically bonded alkylsilyl groups.     

PROGRESS IN PHASE INVERSION EMULSIFICATION FOR EPOXY RESIN WATERBORNE DISPERSIONS

In this review, our recent work in phase inversion emulsification （PIE） for polymer （especially epoxy resin） waterborne dispersions is summarized. Based on experimental results about PIE process, the physical model is proposed which can guide the synthesis of the waterborne dispersions such as polymer/nanoparticle composite dispersion. In the presence of a latent curing catalyst, PIE can give a crosslinkable epoxy resin waterborne dispersion. The dispersions can form cured transparent coatings with some unique properties such as UV shielding. They are promising in functional coatings, waterborne resin matrices for composites, and sizing for high performance fibers.     

核／壳结构增韧剂对环氧树脂的抗冲改性

核／壳结构增韧剂对环氧树脂的抗冲改性张明耀，张会轩，杨海东，冯之榴（吉林工学院化学工程系长春１３００１２）（中国科学院长春应用化学研究所长春）关键词核／壳结构，增韧剂，环氧树脂，共混核／壳结构增韧剂是用分步乳液聚合技术制造的一种复合乳胶粒子，其核为橡...     

富勒烯化聚环氧丙基咔唑的合成与表征

通过Ｆｒｉｅｄｅｌ－Ｃｒｒａｆｔｓ反应制备了富勒烯化的聚环氧丙基咔唑，聚合物中Ｃ６０的含量最高可达７．６ｗｔ％。通过凝胶渗透色谱法测定了聚合物分子量，并采用＾上Ｈ和＾１３Ｃ－ＮＭＲ，ＩＲ，热分析及光谱等手段对其结构进行了分析与表征。     

The synthesis and cationic polymerization of multifunctional silicon-containing epoxy monomers and oligomers

Several series of multifunctional silicon-containing epoxide monomers and oligomers have been prepared using rhodium catalyzed hydrosilation reactions. Dialkyl and diarylsilanes can be condensed with vinyl epoxides to give high yields of the desired diepoxides while the hydrosilation of alkyl and aryl silanes yields a mixture of di and tri epoxy substituted products. The condensation of αω,? Si? H difunctional compounds with vinyl epoxides can be carried out regioselectively to give α-hydrogen-ω-epoxy intermediates, which can be further reacted with di and tri olefins bearing terminal double bonds to give a series of well characterized epoxy functional oligomers. An investigation of the photoinitiated cationic polymerization of the monomers and oligomers, which were prepared during the course of these studies, was carried out. © 1994 John Wiley & Sons, Inc.     

Characteristic behavior of macro-, semimicro- and microelectrodes in voltammetric and chronoamperometric measurements

The advantages of microelectrodes such as the improvement of signal-to-noise ratio, the ability to perform electrochemical measurements in high resistive solutions and small RC-time constants give the possibility of an extended use for voltammetric and chronoamperometric techniques in analytical chemistry. In this comparative study, the microelectrode properties of three selected electrodes were examined. The characterization of a RAM-microarray electrode, an epoxy-impregnated carbon electrode and a conventional glassy carbon macroelectrode was performed by cyclic voltammetry at different scan rates, by DP-voltammetric measurements using different concentrations of supporting electrolyte and by transient measurements. It could be shown, that in comparison to the microarray electrode and to the glassy carbon macroelectrode, respectively, the results obtained by using the epoxy-impregnated carbon electrode are caused by its semimicroelectrode character.